研究概要

スタッフ

メンバー テーマ 活　動 問い合わせ

和　文

英　文

  1. Yoshikuni NAKAO, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Bonding of Si3N4 to Metals with Active Filler Metals", Transaction of J.W.S., Vol.20 No.1 (1989), p.66-76.
  2. Yoshikuni NAKAO, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Reaction Layer Formation in Nitride Ceramics to Metal Joints Bonded with Active Filler Metals", ISIJ International, Vol.30 No.12 (1990), p.1142-1150.
  3. Yoshikuni NAKAO, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Improvement in Bonding Strength of Si3N4-Mo Joint by Controlling Reaction Layer Thickness", Transaction of J.W.S., Vol.21 No.2 (1990), p.135-143.
  4. Kenji SEO, Masahiro KUSAKA, Fumio NOGATA, Toshio TERASAKI, Yoshikuni NAKAO and Kazuyoshi SAIDA: "Study on the Thermal Stress at Ceramics-Metal Joint", JSME International J., Series I (Solid Mechanics, Strength of Materials), Vol.33 No.3 (1990), p.342-348.
  5. You Chul KIM, Kazuyoshi SAIDA, Yunhong ZHOU and Tom H.NORTH: "Insert Layer Design using Residual Stress in Si3N4/Steel Joining as Parameter", Transaction of JWRI, Vol.22 No.1 (1993), p.121-126.
  6. K.SAIDA, Y.ZHOU and T.H.NORTH: "The Influence of Base Metal Grain Size on Isothermal Solidification during Transient Liquid-Phase Brazing of Nickel", Journal of Materials Science Vol.28 No.23 (1993), p.6427-6432.
  7. Yoshikuni NAKAO, Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Kaoru MURABE and Yasuhiro FUKAYA: "Bonding of Aluminum Nitride to Copper for Reducing Thermal Stress", Materials Transactions, JIM, Vol.35 No.12 (1994), p.910-916.
  8. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Daeup KIM and the late Yoshikuni NAKAO: "Transient Liquid Phase Bonding of Ni-Base Single Crystal Superalloy, CMSX-2", ISIJ International, Vol.35 No.10 (1995), p.1298-1306.
  9. ９．Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Daeup KIM, Satoru ASAI, Yasuhiro FURUKAWA and the late Yoshikuni NAKAO: "Bonding Phenomena and Joint Properties of Transient Liquid Phase Bonding of Ni-Base Single Crystal Superalloys", Welding in the World (Journal of the International Institute of Welding), Vol.41 No.2 (1998), 121-131.
  10. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Masahiro INUI and Makoto TAKAHASHI: "Evaluation of Hot-Cracking Susceptibility by Miniature Spot-Varestraint Test, - Repair Weld Cracking of Service-Exposed HP-Modified Heat-Resisting Cast Alloy (1st Report) -", Welding International, Vol.15 No.6 (2001), p.452-462.
  11. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Masahiro INUI and Makoto TAKAHASHI: "Changes in Microstructure of HP-Modified Heat-Resisting Cast Alloys under Long-Term Aging, - Repair Weld Cracking of Service-Exposed HP-Modified Heat-Resisting Cast Alloy (2nd Report) -", Welding International, Vol.15 No.7 (2001), p.509-517.
  12. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Masahiro INUI and Makoto TAKAHASHI: "Mechanism of Hot Cracking in the Heat Affected Zone of Repair Welds, - Repair Weld Cracking of Service-Exposed HP-Modified Heat-Resisting Cast Alloy (3rd Report) -", Welding International, Vol.15 No.9 (2001), p.699-708.
  13. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Hiroaki OHSHIGE: "Prediction of 475°C Embrittlement in 30Cr-2Mo Ferritic Stainless Steel Weldments", Mathematical Modelling of Weld Phenomena 6, ed. by H.Cerjak, Maney Publishing (2002), p.365-390.
  14. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Yasuhiro SHINOHARA: "Computer-Aided Alloy Design of Insert Metal for Transient Liquid Phase Bonding of /'/ Type High Aluminum Ni-Base Superalloy", Science and Technology of Welding and Joining, Vol.8 No.1 (2003), p.29-38.
  15. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Ryoichi TSUDUKI: "In-Situ Sintering Bonding of ODS Superalloys using Pulsed Electric-Current Sintering Technique", Science and Technology of Welding and Joining, Vol.9 No.6 (2004), p.493-500.
  16. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Boyoung JEONG: "Development of Hyper-Interfacial Bonding Technique for Ultra-Fine Grained Steels and Microstructural Analysis of Bonded Joints", Science and Technology of Welding and Joining, Vol.9 No.6 (2004), p.548-554.
  17. Kazuyoshi SAIDA, Kazutoshi NISHIMOTO and Rie SAKAMOTO: "Development of Computer-Aided Optimization System for Transient Liquid Phase Bonding Process", Mathematical Modelling of Weld Phenomena 7, ed. by H.Cerjak, Maney Publishing (2005), p.965-998.
  18. Kazuyoshi SAIDA, Woohyun SONG and Kazutoshi NISHIMOTO: "Diode Laser Brazing of Aluminum Alloy to Steels with Aluminum Filler Metals", Science and Technology of Welding and Joining, Vol.10 No.2 (2005), p.227-235.
  19. Kazuyoshi SAIDA, Woohyun SONG, Kazutoshi NISHIMOTO and Makoto SHIRAI: "Diode Laser Brazing of Heat-Resistant Alloys using Tandem Beam", Materials Science Forum, Vol.502, (2005), p.493-498.
  20. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Boyoung JEONG: "Microstructure and Mechanical Properties of Hyper-Interfacial Bonded Joints of Ultra-Fine Grained High Strength Steels", Materials Science Forum, Vol.502, (2005), p.437-442.
  21. Kazuyoshi SAIDA, Kazutoshi NISHIMOTO, Yuki KAWABATA and Ryoichi TSUDUKI: "Sintering Behaviors of Metallic and Ceramic Powders during Pulsed Electric-Current Sintering Process", Novel Materials Processing by Advanced Electromagnetic Energy Sources, ed. by S.Miyake, Elsevier (2005), p.289-292.
  22. Boyoung JEONG, Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Shin-ichi KOHRIYAMA: "Development of a Hyper-Interfacial Bonding Process for Ultra fine-Grained Steels", Welding International, Vol.19 No.1 (2005), p.37-44.
  23. Boyoung JEONG, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Study of Hyper-Interfacial Bonding of Ultra fine-Grained Steels", Welding International, Vol.19 No.4 (2005), p.287-296.
  24. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Osamu KATSUYAMA: "Prediction of Sigma Phase Precipitation in Super Duplex Stainless Steel Weldments", Welding in the World (Journal of the International Institute of Welding), Vol.50 No.3/4 (2006), p.13-28.
  25. Yoshihiro FUJITA, Kazuyoshi SAIDA and Kazutoshi NISHIMOTO: "Study of Microstructure in Surface-Melted Region of Ni-Base Single Crystal Superalloy CMSX-4", Materials Science Forum Vol.512 (2006), p.313-318.
  26. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Hironori OKAUCHI: "Microcracking Susceptibility in Reheated Weld Metal, - Microcracking in Multipass Weld Metal of Alloy 690 (Part 1) -", Science and Technology of Welding and Joining, Vol.11 No.4 (2006), p.455-461.
  27. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Hironori OKAUCHI and Kenji OHTA: "Microcracking Mechanism in Reheated Weld Metal, - Microcracking in Multipass Weld Metal of Alloy 690 (Part 2) -", Science and Technology of Welding and Joining, Vol.11 No.4 (2006), p.462-470.
  28. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Hironori OKAUCHI and Kenji OHTA: "Prevention of Microcracking in Reheated Weld Metal by La Addition to Filler Metal, - Microcracking in Multipass Weld Metal of Alloy 690 (Part 3) -", Science and Technology of Welding and Joining, Vol.11 No.4 (2006), p.471-479.
  29. Kazuyoshi SAIDA, Woohyun SONG and Kazutoshi NISHIMOTO: "Laser Brazing of Alloy 600 with Precious Filler Metals", Science and Technology of Welding and Joining, Vol.11 No.6 (2006), p.694-700.
  30. Kazuyoshi SAIDA, Woohyun SONG and Kazutoshi NISHIMOTO: "Laser Brazing Phenomena of Heat-Resistant Alloys with Precious Brazing Filler Metals", Materials Science Forum, Vol.539-543 (2007), p.4053-4058.
  31. Kazuyoshi SAIDA, Woohyun SONG and Kazutoshi NISHIMOTO: "Theoretical Approaches to Erosion and Wetting Phenomena during Laser Brazing Process", Designing of Interfacial Structures in Advanced Materials and their Joints, Solid State Phenomena (Part B of "Diffusion and Defects Data"), Vol.127 (2007), p.301-306.
  32. Kazuyoshi SAIDA, Kenji OHTA and Kazutoshi NISHIMOTO: "Microcracking Susceptibility in Dissimilar Multipass Welds of Alloy 690 to Type 316L Stainless Steel using La added Filler Metals", Science and Technology of Welding and Joining, Vol.12 No.7 (2007), p.594-603.
  33. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Daisuke ABE, Ryo ISHIBASHI and Jiro KUNIYA: "Effect of Alloying Elements on Spinodal Decomposition of Ferritic Phase in Stainless Steel Welds", Mathematical Modelling of Weld Phenomena 8, ed. by H.Cerjak, Maney Publishing, (2007), p.253-276.
  34. Yoshihiro FUJITA, Kazuyoshi SAIDA, Mitsuhiro KUSANO and Kazutoshi NISHIMOTO: "Crystalline Controlled Built-up Repairing Utilizing Unidirectional Solidification", Welding International, Vol.21 No.11 (2007), p.782-789.
  35. Kazuyoshi SAIDA, Woohyun SONG and Kazutoshi NISHIMOTO: "Computer Simulation of Wetting and Flowing Behaviors of Filler Metal during Laser Brazing Process", Advanced Welding and Micro Joining / Packaging for the 21st Century, Materials Science Forum, Vol.580-582 (2008), p.271-274.
  36. Kazuyoshi SAIDA, Masashi SAKAMOTO and Kazutoshi NISHIMOTO: "Mechanical Approach for Prediction of Microcracking in Multipass Weld Metal of Ni-Base Alloy 690 ", Advanced Welding and Micro Joining / Packaging for the 21st Century, Materials Science Forum, Vol.580-582 (2008), p.1-4.
  37. Yoshihiro FUJITA, Kazuyoshi SAIDA and Kazutoshi NISHIMOTO: "Laser Epitaxial Cladding of Ni-base Single Crystal Superalloy", Advanced Welding and Micro Joining / Packaging for the 21st Century, Materials Science Forum, Vol.580-582 (2008), p.67-70.
  38. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA and Yoshihiro FUJITA: "Crystal Growth in Laser Surface Melting and Cladding of Ni-Base Single Crystal Superalloy", Welding in the World, Vol.52 No5/6 (2008), p.64-78.
  39. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Masashi SAKAMOTO and Wataru KONO: "Effect of Filler Metal La Additions on Microcracking in Multipass Laser Overlay Weld Metal of Alloy 690", Hot Cracking Phenomena in Welds II, ed. by H.Herold, C.E.Cross and J.C.Lippold, Springer-Verlag, (2008), p.389-408.
  40. Kazuyoshi SAIDA, Takehiro SAKATANI, Woohyun SONG and Kazutoshi NISHIMOTO: "Hot Cracking in the Laser Braze Joint of High Strength Stainless Steel using Gold Brazing Filler Metal, - Prevention of Hot Cracking by Controlling the Thermal Cycle -", Science and Technology of Welding and Joining, Vol.14 No.4 (2009), p.254-261.
  41. Kazuyoshi SAIDA, Akira TANIGUCHI, Masashi SAKAMOTO and Kazutoshi NISHIMOTO: "Effect of Ce Addition to Filler Metal on Microcracking Susceptibility of Alloy 690 Multipass Weld Metal", Quarterly Journal of the Japan Welding Society, Vol.27 No.2 (2009), p.144s-148s．
  42. Kazuyoshi SAIDA, Haruki OHNISHI and Kazutoshi NISHIMOTO: "Fluxless Laser Brazing of Aluminum Alloy to Galvanized Steel using a Tandem Beam, - Dissimilar Laser Brazing of Aluminum Alloy and Steels -", Welding International, Vol.24 No.3 (2010), p.161-168.
  43. Kazuyoshi SAIDA, Yuto OKABE, Kentaro HATA, Kazutoshi NISHIMOTO, Kiyoshi KIUCHI and Junpei NAKAYAMA: "Hot Cracking Behaviour and Susceptibility of Extra High-Purity Type 310 Stainless Steels", Science and Technology of Welding and Joining, Vol.15 No.1 (2010), p.87-96．
  44. Kazuyoshi SAIDA, Kazutoshi NISHIMOTO, Kazuhiro OGAWA, Shuji OKAGUCHI and Kazuki FUJIWARA: "Proposal of Welding Consumable of Triplex Stainless Steel for Ultra High-Strength Steel", Science and Technology of Welding and Joining, Vol.15 No.3 (2010), p.185-193．
  45. Kazuyoshi SAIDA, Arata HAYATA and Kazutoshi NISHIMOTO: "Numerical Analysis of Retained Austenite Formation in Triplex Stainless Steel Weld Metal", Mathematical Modelling of Weld Phenomena 9, ed. by H.Cerjak and N.Enzinger, Maney Publishing (2010), p.253-275．
  46. Kazuyoshi SAIDA and Kazutoshi NISHIMOTO: "Regulatory Criteria of Minor and Impurity Elements for Welding Integrity of Alloy 690 and Alloy 690 to Type 316L Stainless Steel Multipass Welds, - Evaluation Technologies for Integrity in Repair Welding of Ageing Plants, and for Reliability of Repaired Welds (Part 1) -", International Symposium on the Ageing Management and Maintenance of Nuclear Power Plants (ISaG2010) (2011), p.207-220.
  47. Kazuyoshi SAIDA, Akira TANIGUCHI, Hironori OKAUCHI, Hiroyuki OGIWARA and Kazutoshi NISHIMOTO: "Prevention of Microcracking in Dissimilar Multipass Welds of Alloy 690 to Type 316L Stainless Steel by Ce Addition to Filler Metal", Science and Technology of Welding and Joining, Vol.16 No.6 (2011), p.553-560．
  48. Kazutoshi NISHIMOTO, Kazuyoshi SAIDA, Kiyoshi KIUCHI and Junpei NAKAYAMA: "Influence of Minor and Impurity Elements on Hot Cracking Susceptibility of Extra High-Purity Type 310 Stainless Steels", Hot Cracking Phenomena in Welds III, ed. by J.C.Lippold, T.Böllinghaus and C.E.Cross, Springer-Verlag, (2011), p.183-208.
  49. Tadafumi HASHIMOTO, Yusuke OSAWA, Masashi KAMEYAMA, Shinro HIRANO, Naoki CHIGUSA, Kazuyoshi SAIDA, Masahito MOCHIDUKI and Kazutoshi NISHIMOTO: "Long Term Stability of Compressive Residual Stress Introduced in Alloy 600 by Water Jet Peening under Elevated Temperature Environment", Proceedings of PVP2011 (ASME Pressure Vessels and Piping Division Conference), PVP2011-57091, (2011).
  50. Lina YU, Yuma NAKABAYASHI, Shinsuke ITOH, Masashi KAMEYAMA, Shinro HIRANO, Naoki CHIGUSA, Kazuyoshi SAIDA, Masahito MOCHIDUKI and Kazutoshi NISHIMOTO: "Neural Network Prediction of Hardness in the Heat Affected Zone of Low-Alloy Steel Produced by Temper Bead Welding",　ISIJ International, Vol.51 No.9 (2011), p.1506-1515.
  51. Hiroyuki OGIWARA, Hiroaki MORI, Hiroki TOKUICHI, Kazuyoshi SAIDA, Kazutoshi NISHIMOTO and Hiroyasu TANIGAWA: "Hot Cracking Susceptibility of F82H with Controlled Ta Content", Journal of Nuclear Materials, Vol.417, Issues 1-3 (2011), p.59-62.
  52. Kazuyoshi SAIDA, Yuki NOMOTO, Hironori OKAUCHI, Hiroyuki OGIWARA and Kazutoshi NISHIMOTO: "Influences of Phosphorus and Sulphur on Ductility-Dip Cracking Susceptibility in Multipass Weld Metal of Alloy 690", Science and Technology of Welding and Joining, Vol.17 No.1 (2012), p.1-8．
  53. Kazuyoshi SAIDA, Hiroyuki OGIWARA and Kazutoshi NISHIMOTO: "Development of Low Temperature Bonding Technique of Titanium and Zirconium using Hydrogen Diffusion-Induced Phase Transformation", Materials Science Forum, Vols. 706-709 (2012), pp.3010-3015．
  54. Lina YU, Masato SASA, Kenta OHNISHI, Masashi KAMEYAMA, Shinro HIRANO, Naoki CHIGUSA, Takehiko SERA, Kazuyoshi SAIDA, Masahito MOCHIZUKI and Kazutoshi NISHIMOTO: "Neural Network-Based Toughness Prediction in HAZ of Low-Alloy Steel Produced by Temper Bead Welding Repair Technology", Science and Technology of Welding and Joining, Vol.18 No.2 (2013), p.120-134.
  55. Eun Joon CHUN, Hayato BABA, Koji TERASHIMA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Prediction of σ Phase Embrittlement in Type 316FR Weld Metal", Welding Journal, Vol.92, No.5 (2013), p.133s-139s.
  56.  
  57. 56．Kazuyoshi SAIDA, Hideki MATSUSHITA, Kazutoshi NISHIMOTO, Kiyoshi KIUCHI and Junpei NAKAYAMA: "Quantitative Influence of Minor and Impurity Elements on Solidification Cracking Susceptibility of Extra High-Purity Type 310 Stainless Steel", Science and Technology of Welding and Joining, Vol.18 No.7 (2013), p.616-623.
  58. Kazuyoshi SAIDA, Yasushi NISHIJIMA, Kazutoshi NISHIMOTO, Kiyoshi KIUCHI and Junpei NAKAYAMA: "Contribution of Phosphorus and Sulfur on Hot Cracking Susceptibility of Extra High-Purity 25Cr-35Ni Stainless Steels", Welding Journal, Vol.92 No.11 (2013), p.322s-331s.
  59. Eun Joon CHUN, Hayato BABA, Koji TERASHIMA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Prediction of σ Phase Precipitation in Type 316FR Stainless Steel Weld Metal", Quarterly Journal of the Japan Welding Society, Vol.31 No.4 (2013), p.168s-172s.
  60. Lina YU, Masato SASA, Kenta OHNISHI, Masashi KAMEYAMA, Shinro HIRANO, Naoki CHIGUSA, Takehiko SERA, Kazuyoshi SAIDA, Masahito MOCHIZUKI and Kazutoshi NISHIMOTO: "Neural Network-Based Hardness and Toughness Prediction in HAZ of Temper Bead Welding Repair Technology for Nuclear Power Plants", Quarterly Journal of the Japan Welding Society, Vol.31 No.4 (2013), p.173s-177s.
  61. Takehiko, SERA Shinro HIRANO, Naoki CHIGUSA, Shigetaka OKANO, Kazuyoshi SAIDA, Masahito MOCHIUKI and Kazutoshi NISHIMOTO："Long-term Reliability of Improvement of Residual Stresses by Preventive Maintenance using Surface Finishing", Quarterly Journal of the Japan Welding Society, Vol.31 No.4 (2013), p.119s-123s.
  62. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Precipitation of Sigma and Chi Phases in δ-ferrite of Type 316FR Weld Metals", Materials Characterization, Vol.86 (2013), p.152-166.
  63. Hiroaki MORI, Hiroyuki OGIWARA, Kazuyoshi SAIDA Hisashi SERIZAWA, Takanori HIROSE, Hiroyasu TANIGAWA: "Laser Beam Welding for Reduced Activation Ferritic/Martensitic Steel F82H", Materials Science Forum Vols. 783-786 (2014), p.2771-2776.
  64. Lina YU, Masato SASA, Masashi KAMEYAMA, Shinro HIRANO, Naoki CHIGUSA, Takehiko SERA, Kazuyoshi SAIDA Masahito MOCHIZUKI and Kazutoshi NISHIMOTO: "Hardness Prediction for Temper Bead Welding of Non-Consistent Layer Technique", Materials Science Forum Vols. 783-786 (2014), p.2851-2856.
  65. Lina YU, Kazuyoshi SAIDA, Masahito MOCHIZUKI, Masashi KAMEYAMA, Naoki CHIGUSA and Kazutoshi NISHIMOTO: "Hardness Prediction of HAZ in Temper Bead Welding by Non-Consistent Layer Technique", E-Journal of Advanced Maintenance (Japan Society of Maintenology), Vol.6 No.2 (2014), p.34-47.
  66. Kazuyoshi SAIDA, Haruki OHNISHI and Kazutoshi NISHIMOTO: "Laser Brazing of TiAl Intermetallic Compound using Precious Brazing Filler Metals", Welding in the World, Vol.59, Issue 1 (2015), p.9-22.
  67. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Development of Laser Beam Welding Varestraint Test for Assessment of Solidification Cracking Susceptibility in Laser Welds", Metals and Materials International, Vol.21 No.3 (2015), p.543-553.
  68. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Theoretical Analysis for Solidification Cracking Susceptibility in Type 316FR Stainless Steel Laser Welds", Quarterly Journal of the Japan Welding Society, Vol.33 No.2 (2015), p.20s-24s.
  69. Kazuyoshi SAIDA, Yasushi NISHIJIMA, Hiroyuki OGIWARA and Kazutoshi NISHIMOTO: "Prediction of Solidification Cracking in Laser Welds of Type 310 Stainless Steels, Welding International, Vol.29 No.8 (2015), p.577-586.
  70. Kazuyoshi SAIDA, Kousuke BUNDA, Hiroyuki OGIWARA and Kazutoshi NISHIMOTO: "Microcracking Susceptibility in Dissimilar Multipass Welds of Ni-Base Alloy 690 and Low-Alloy Steel", Welding International, Vol.29 No.9 (2015), p.668-680.
  71. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Effect of Sodium on Repair Weldability of SUS316FR for a Fast Breeder Reactor", Welding International, Vol.30 No.2 (2016), p.79-90.
  72. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Evaluation of Solidification Cracking Susceptibility in Austenitic Stainless Steel Welds using Laser Beam Welding Varestraint Test", Hot Cracking Phenomena in Welds IV, in printing.
  73. Eun Joon CHUN, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Development of Tranverse-Varestraint Test Procedure with Laser Beam Welding and Evaluation of Solidification Cracking Susceptibility in Type 316FR Stainless Steel Welds, -Solidification Cracking Susceptibility for Type 316FR Stainless Steel Laser Welds", Welding in the World, in submitting.
  74. Kazuyoshi SAIDA, Yoshihiro TANABE, Kazutoshi NISHIMOTO, Hiroshige INOUE and Yusuke OIKAWA: "Prediction of Phase Transformation in Duplex Stainless Steel Welds", Mathematical Modelling of Weld Phenomena 11, ed. by C.Sommitsch, Maney Publishing, in submitting.
  75. Eun Joon CHUN, Hayato BABA, Kazutoshi NISHIMOTO and Kazuyoshi SAIDA: "Solidification Cracking Susceptibility in Type 310S Stainless Steel Laser Welds", Welding Journal, in submitting.

Copylight© 2018 @Materials Joining Process Area, Saida Lab. All Right Reserved.