Articles


2015/ 2014/ 2013/ 2012/ 2011/.
 
2015
  1. A3003/SUS304重ね摩擦攪拌接合継手の接合界面におよぼす
    熱履歴の影響
    西田　英人，小椋　智，波多野　遼一，廣瀬　明夫
    軽金属溶接，Vol. 53，pp. 24-29 (2015)．

  2. 高速圧縮変形によるAl-Mg-Si合金の時効硬化性の改善
    堀川　敬太郎，木谷　祐貴，小椋　智，廣瀬　明夫，高橋　誠，小林　秀敏
    軽金属，Vol. 65，pp. 498-502 (2015)

  3. Effects of Bonding Conditions on Bondability Using Zn/Al/Zn Clad Solder
    Y. Yamaguchi, O. Ikeda, Y. Oda, S. Hata, K. Kuroki, H. Kuroda, A. Hirose
    Journal of Electronic Materials Vol. 44, pp. 4769-4778 (2015).

  4. Enhanced Age Hardening in an Al-Mg-Si Alloy Using High-Speed Compression
    Keitaro Horikawa, Yuki Kitani, Tomo Ogura, Akio Hirose, Makoto Takahashi, Hidetoshi Kobayash
    Materials Transactions 56, pp. 1058-1062 (2015).

  5. Effects of Reducing Solvent on Copper, Nickel, and Aluminum Joining Using Silver Nanoparticles Derived from a Silver Oxide Paste
    Tomo Ogura, Shinya Takata, Makoto Takahashi, Akio Hirose
    Materials Transactions Vol. 56, pp. 1030-1036 (2015).

  6. Al残存型Zn/Al/Znクラッド材を用いた高放熱Pbフリー接合技術
     山口拓人, 東平知丈, 池田靖, 秦昌平, 小田祐一, 黒木一真, 黒田洋光, 廣瀬明夫
    溶接学会論文集，Vol. 33, pp. 171-179 (2015)．

  7. Joining of Pure Copper Using Cu Nanoparticles Derived from CuO Paste
     Tomoyuki Fujimoto, Tomo Ogura, Tomokazu Sano, Makoto Takahashi, Akio Hirose
    Materials Transactions Vol. 56, pp. 992-996 (2015).

  8. Three-Layer Zn/Al/Zn Clad Solder for Die Attachment
    T. Yamaguchi, O. Ikeda, Y. Oda, S. Hata, K. Kuroki, H. Kuroda, A. Hirose
    Journal of Electronic Materials Vol. 44, pp. 751-760 (2015).

  9. P-ρ-T measurements of H2O up to 260 GPa under laser-driven shock loading
    T. Kimura, N. Ozaki, T. Sano, T. Okuchi, T. Sano, K. Shimizu, K. Miyanishi, T. Terai, T. Kakeshita, M. French, R. Redmer, Y. Sakawa, R. Kodama
    The Journal of Chemical Physics Vol. 142, pp. 164504-1-5.

  10. フェムト秒レーザ駆動衝撃波を繰り返し負荷した鉄中に形成される
    高密度転位組織
    松田　朋己, 佐野　智一, 塚田　貴大, 荒河　一渡, 廣瀬　明夫
    レーザ加工学会誌，Vol. 22，pp. 46-51 (2015)．

Return to the top

 
2014
  1. Femtosecond laser-driven shock-induced dislocation structures in iron
    T. Matsuda, T. Sano, K. Arakawa, O. Sakata, H. Tajiri, A. Hirose
    Applied Physics Express Vol. 7, pp. 122704 (2014).

  2. Dislocation structure produced by an ultrashort shock pulse
    T. Matsuda, T. Sano, K. Arakawa, A. Hirose
    Journal of Applied Physics Vol. 116, pp. 183506-1-5 (2014).

  3. Low-current resistance spot welding of pure copper using silver oxide paste
    Y. Suzuki, T. Ogura, M. Takahashi, A. Hirose
    Materials Characterization Vol. 98. pp. 186-192 (2014).

  4. Multiple-shocks induced nanocrystallization in iron
    T. Matsuda, T. Sano, K. Arakawa, A. Hirose
    Applied Physics Letters Vol. 105, pp. 021902-1-4 (2014).

  5. 抵抗スポット溶接による鋼とAl合金のシールスポット溶接
    －亜鉛インサートによる鋼とAl合金との異種材料接合－
    宮本　健二，中川　成幸，杉　千花，小椋　智，廣瀬　明夫:
    溶接学会論文集，Vol. 32，2，pp. 95-106 (2014)．

  6. 抵抗スポット溶接による鋼とAl合金の異種材料接合
    －亜鉛インサートによる鋼とAl合金の異種材料接合－
    宮本　健二, 中川　成幸, 杉　千花, 津島　健次, 岩谷　信吾, 北條　慎治, 小椋　智, 廣瀬　明夫, 小林　紘二郎
    溶接学会論文集， Vol. 32, No. 2, pp. 83-94 (2014).

  7. 亜鉛インサートが鋼とAl合金の異種材料拡散接合の継手特性に及ぼす効果
    －亜鉛インサートによる鋼とAl合金の異種材料接合－
    宮本　健二, 中川　成幸, 津島　健次, 片山　忠明, 岩谷　信吾, 北條　慎治, 小椋　智, 廣瀬　明夫, 小林　紘二郎
    溶接学会論文集， Vol. 32, No. 1, pp. 15-30 (2014).

  8. Formation of interfacial microstructure in a friction stir welded lap joint between aluminum alloy and stainless steel
    Taichi Nishida, Tomo Ogura, Hidehito Nishida, Mitsuo Fujimoto, Makoto Takahashi, Akio Hirose
    Science and Technology of Welding and Joining, Vol. 19, No. 7, pp. 609-616 (2014).

  9. 多パス摩擦攪拌接合によるA3003/SUS304重ね継手の機械的特性
    西田　英人, 倉嶋　寛貴, 藤本　光生, 小椋　智, 廣瀬　明夫
    軽金属溶接, Vol. 52, No. 10, pp. 374-383 (2014).

  10. 低温焼結接合のための酸化銀および酸化銅混合ペーストを用いた
    銅継手の接合性評価
    小椋　智，柳下　朋大，高田　慎也，藤本　智之，廣瀬　明夫
    日本金属学会誌，Vol. 78, pp. 280-285 (2014).

  11. Point defect clusters induced by high-speed deformation and its effect on age-hardening in 6061 aluminum alloys
    Keitaro Horikawa, Yuki Kitani, Tomo Ogura, Akio Hirose, Makoto Takahashi, Hidetoshi Kobayashi
    Materials Science Forum, Vol. 794-796, pp. 778-783 (2014).

  12. Interfacial Reaction during Dissimilar Friction Stir Lap Welding of Aluminum Alloy to Stainless Steel
    Tomo Ogura, Taichi Nishida, Makoto Takahashi, Hidehito Nishida, Mitsuo Fujimoto, Akio Hirose
    Materials Science Forum, Vol. 794-796, pp. 389-394 (2014).

  13. Microscale Evaluation of Mechanical Properties and the Interfacial Microstructures of Friction Stir Welded Aluminum Alloy/Stainless Steel Dissimilar Lap Joints
    Tomo Ogura, Taichi Nishida, Hidehito Nishida, Mitsuo Fujimoto, Akio Hirose,
    Materials Science Forum, Vol. 783-786, pp. 2786-2791 (2014).

  14. Mechanical properties and microstructures of resistance spot welded DP980 steel joints using a pulsed current pattern
    C. Sawanishi, T. Ogura, K. Taniguchi, R. Ikeda, K. Oi, K. Yasuda, A, Hirose
    Science and Technology of Welding and Joining Vol. 19, pp. 52-59 (2014).

Return to the top

 
2013
  1. Selection of Particle Size and Solvent to Lower the Pressure Required for Metal-to-Metal Bonding using Silver Nanoparticle Pastes
    Tomo Ogura, Yosuke Konaka, Eichi Ide, Toshiaki Morita, Akio Hirose
    Quarterly Journal of the Japan Welding Society Vol. 31, No. 4, pp. 197s-201s (2013).

  2. Interfacial microstructure evolution and thermal reliability of copper/nickel joints formed by ultrasonic bonding
    Yo Tanaka, Shinichi Fujiwara, Tomo Ogura, Tomokazu Sano, Akio Hirose
    Quarterly Journal of the Japan Welding Society Vol. 31, No. 4, pp. 192s-196s (2013).

  3. Femtosecond Laser Direct Joining of Copper with Polyethylene Terephthalate
    T. Sano, S. Iwasaki, Y. Ozeki, K. Itoh, A. Hirose
    Matererials Transactions Vol. 54, pp. 926-930 (2013).

  4. レーザ誘起前方転写法による金属微細配線のパターニング
    佐野智一, 廣瀬明夫
    スマートプロセス学会誌，Vol. 2, No. 4, pp. 192-196 (2013).

  5. Improvement of strength and ductility of an Al-Zn-Mg alloy by controlling grain size and precipitate microstructure with Mn and Ag addition
    Tomo Ogura, Takanori Otani, Akio Hirose, Tatsuo Sato
    Materials Science & Engineering A Vol. 580, pp. 288-293 (2013).

  6. 6061アルミニウム合金/亜鉛めっき鋼の摩擦攪拌点接合における
    界面組織が継手強度に及ぼす影響
    山本　将貴，小椋　智，大橋　良司，藤本　光生，廣瀬　明夫
    軽金属溶接，Vol. 51, pp. 223-232 (2013).

  7. Cu/Ni の超音波接合とその熱的信頼性評価
    田中　陽，藤原　伸一，小椋　智，佐野　智一，廣瀬　明夫
    溶接学会論文集，Vol. 31，pp. 66-74 (2013)．

  8. Bondability of copper joints formed using a mixed paste of Ag2O and CuO for low-temperature sinter bonding
    Tomo Ogura, Tomohiro Yagishita, Shinaya Takata, Tomoyuki Fujimoto, Akio Hirose
    Materials Transactions Vol. 56, 6, pp. 860-865 (2013).

  9. Effect of polyethylene glycols with different polymer chain lengths on the bonding process involving in situ formation of silver nanoparticles from Ag2O
    Tomohiro Yagishita, Tomo Ogura, Akio Hirose
    Materials Transactions, Vol. 56, 6, pp. 866-871 (2013).

  10. Microscale evaluation of mechanical properties of a friction stir welded A6061 aluminium alloy/304 stainless steel dissimilar lap joint
    T. Ogura, T. Nishida, Y. Tanaka, H. Nishida, S. Yoshikawa, M. Fujimoto, A. Hirose
    Science and Technology of Welding and Joining Vol. 18, pp. 108-113 (2013).

  11. Effects of solvents in polyethylene glycol series on the bonding of copper joints using Ag2O paste
    Shinya Takata, Tomo Ogura, Akio Hirose
    Journal of Electronic Materials Vol. 42, pp. 507-515 (2013).
 
2012
  1. Improvement in fatigue performance of friction stir welded A6061-T6 aluminum alloy by laser peening without coating
    Y. Sano, K. Masaki, T. Gushi, T. Sano
    Materials & Design Vol. 36, pp. 809?814 (2012).

  2. シリコン内部を伝搬する衝撃波面の直接計測
    横山尚也, 尾崎典雅, 佐野智一, 曽田智史, 木村友亮, 宮西宏併, 浅海雄人, 浦西宏幸, 佐野孝好, 坂和洋一, 廣瀬明夫, 兒玉了祐
    プラズマ核融合学会誌, Vol. 88, No. 5, pp. 249-250 (2012).

  3. フェムト秒レーザ駆動衝撃波によるシリコン高圧構造の常圧下における残存
    辻野雅之, 佐野智一, 尾崎典雅, 坂田修身, 荒河一渡, 大越昌幸, 井上成美, 森博太郎, 兒玉了祐, 廣瀬明夫
    レーザ加工学会誌, Vol. 19, No. 1, pp. 54-59 (2012).

  4. Interfacial Bonding Behavior between Silver Nanoparticles and Gold Substrate Using Molecular Dynamics Simulation
    T. Ogura, M. Nishimura, H. Tatsumi, W. Takahara, A. Hirose
    Materials transactions Vol. 53, pp. 2085-2090 (2012).

  5. 高温使用環境に適合した鉛フリー接合技術
    廣瀬 明夫
    電子情報通信学会論文誌C，Vol. J95-C, pp. 245-253 (2012).

  6. CuとNiの超音波接合に関する初期接合性評価
    藤原 伸一，田中　陽，小椋　智，佐野 智一，廣瀬 明夫
    電子情報通信学会論文誌C, Vol. J95-C，pp. 271-278 (2012).

  7. Interfacial Microstructure Observation and Nanoidentation Measurements in Mild steel/HT780 Clad Plate
    C. Sawanishi, T. Ogura, H. Sumi, K. Oi, K. Yasuda, A. Hirose
    Materials Science and Technology Vol. 28, pp. 1459-1464 (2012).

  8. Effects of Au and Pd Additions on Joint Strength, Electrical Resistivity and Ion-migration Tolerance in Low-temperature Sintering Bonding using Ag2O Paste
    T. Ito, T. Ogura, A. Hirose
    Journal of Electronic Materials Vol. 41, pp. 2573-2579 (2012).

  9. Partitioning evaluation of mechanical properties and the interfacial microstructure in a friction stir welded aluminum alloy/stainless steel lap joint
    T. Ogura, Y. Saito, T. Nishida, H. Nishida, T. Yoshida, N. Omichi, M. Fujimoto, A. Hirose
    Scripta Materialia Vol. 66, pp. 531-534 (2012).

  10. Formation of High-Density Dislocations and Hardening in Femtosecond-Laser-Shocked Silicon
    M. Tsujino, T. Sano, T. Ogura, M. Okoshi, N. Inoue, N. Ozaki, R. Kodama, K. F. Kobayashi, A. Hirose
    Applied Physics Express Vol. 5, pp. 022703-1-3 (2012).

  11. Effects of Pre-Aging on Bendability of an Asymmetric-Rolled Al-Mg-Si Alloy
    T. Ogura, A. Hirose, T. Sato
    Materials Science Forum Vol. 706-709, pp. 377-382 (2012).

  12. Low Temperature Sintering Bonding Process Using Ag Nanoparticles Derived from Ag2O for Packaging of High-temperature Electronics
    A. Hirose, N. Takeda, H. Tatsumi, Y. Akada, T. Ogura, E. Ide, T. Morita
    Materials Science Forum Vol. 706-709, pp. 2962-2967 (2012).
 
2011
  1. Synthesis of submicron metastable phase of silicon using femtosecond laser-driven shock wave
    M. Tsujino, T. Sano, O. Sakata, N. Ozaki, S. Kimura, S. Takeda, M. Okoshi, N. Inoue, R. Kodama, K. F. Kobayashi, A. Hirose
    Journal of Applied Physics Vol. 110, pp. 126103-1-3 (2011).

  2. 高強度レーザー衝撃圧縮を用いたメガバール領域における水の状態方程式計測
    木村友亮, 尾崎典雅, 奥地拓生, 佐野孝好, 清水克哉, 宮西宏併, 遠藤恭, 實井辰也, 曽田智史, 佐野智一, 寺井智之, 廣瀬明夫, 掛下知行, 坂和洋一, 兒玉了祐
    日本惑星科学会誌, Vol. 20, No. 1, pp. 36-41 (2011).

  3. 合金元素を含んだ6000系アルミニウム合金／鋼異種金属接合における
    界面反応層のナノインデンテーション測定
    小椋　智，上田　佳祐，齋藤　雄一，廣瀬　明夫
    軽金属，Vol. 61, pp. 250-254 (2011).

  4. Al-Zn-Mg合金のPFZ形成および機械的性質に及ぼすSn添加ならびに
    Ag，Sn複合添加の影響
    小椋　智，廣澤　渉一，廣瀬　明夫，里　達雄
    軽金属，Vol. 61，pp. 316-321 (2011).

  5. 亜鉛インサートを用いた5000系アルミニウム合金摩擦スタッド接合継手における
    ミクロ組織と機械的特性
    西田　太一，小椋　智，藤本　光生，廣瀬　明夫
    軽金属, Vol. 61, pp. 322-327 (2011).

  6. Nanoindentation Measurement of Interfacial Reaction Layers in 6000 Series Aluminum Alloys and Steel Dissimilar Metal Joints with Alloying Elements
    T. Ogura, K. Ueda, Y. Saito, A. Hirose
    Materials Transactions Vol. 52, pp. 979-984 (2011).

  7. Effects of Microalloying Tin and Combined Addition of Silver and Tin on the Formation of Precipitate Free Zones and Mechanical Properties in Al-Zn-Mg Alloys
    T. Ogura, S. Hirosawa, A. Hirose, T. Sato
    Materials Transactions Vol. 52, pp. 900-905 (2011).

  8. Effects of Zn-based Alloys Coating on Mechanical Properties and Interfacial Microstructures of Steel /Aluminum Alloy Dissimilar Metals Joints Using Resistance Spot Welding
    K. Ueda, T. Ogura, S. Nishiuchi, K. Miyamoto, T. Nanbu, A. Hirose
    Materials Transactions Vol. 52, pp. 967-973 (2011).

  9. Microstructure and Mechanical Properties of 5000 Series Aluminum Stud Joints with Zn Insert Using Friction Welding
    T. Nishida, T. Ogura, M. Fujimoto, A. Hirose
    Materials Transactions Vol. 52, pp. 960-966 (2011).

  10. Evaluation of Interfacial Bonding Utilizing Ag2O-Derived Silver Nanoparticles using TEM Observation and Molecular Dynamics Simulation
    T. Ogura, M. Nishimura, H. Tatsumi, N. Takeda, W. Takahara, A. Hirose
    The Open Surface Science Journal Vol. 3, pp. 55-59 (2011).